LEVELLING FIX LEVEL
FLS PRODUCTION MODEL

Economy Production FLS with proven technical qualities.
To level off, fix and anchor tool machines, plants and devices.

Not many tool machines are exempt enough from deformation so as to obtain the wanted processing precision with no need in recurring to foundations and a stiff connection to them. Only recently, the placement system is being taken into consideration. The placement system is the machine’s connection to the foundations, according to the necessary foundation’s calculation in order to assure a very long-lasting faultless functioning of the machine.

During the pieces’ processing, pallet or pillar of a tool machine undergoes many different stresses: bending moments due to the processing forces, variances of the anchoring pressures due to the pieces’ weight and to moving loads. Speed variations of the moving parts of the machine, or of the processing pieces, generate inertial forces that, in turn, change the anchoring pressures at the base of the machine.

All these stresses tend to generate permanent or temporary variations of the original guide surfaces’ alignment, influencing the processing precision.

Machines must be placed on foundations and connected so as to make an entire rigid complex..
Livellatori FIX Level

Misure e dati tecnici dei modelli di base - serie FLS - tipi III e IV

Economy Production FLS with proven technical qualities

FLS Production Model jacks are a lightened and simplified solution from FL production model. The most used solution is the one, which allows the employ of CHI (concrete bolt) variation placed in the jack’s centre, that’s why the basic execution with the central hole is still processed. ZA version, instead, has been abandoned, as it implied 2 side clamps and therefore the whole basic perimetrical edge. This way we obtained a considerable lightening without influencing capacity values and elasticity modules. So, ZA version is no more available but it is possible to install any other mentioned version.

FLS III and FLS IV jacks have been tested at the proofs and research institute OMECO in Monza
__________________________________________________________________